This machine is used to carry out hydrostatic test for SAW steel pipe. It concurrently detects manufacturing flaws and eliminates internal residual stress arises during steel pipe forming process. End Platens embedded with  polyurethane sealing rings. The pipe is pressurized by water and  hold for a specified time before de-pressurizing.
Pipe Specification
Pipe Diameter : Ø508mm - Ø2540mm
Wall Thickness : 5mm – 25.4mm
Pipe Length : 12m, 18m, 24m
Pipe Material : Up to X80

Machine Specification

Test Fluid Pressure : ≤21MPa
Hydraulic Pressure : ≤25.4MPa
Resisting Fluid : Hydraulic Oil
Pressure Holding Time : 0-40 seconds

copyright 2011-2012 © Byard Spiral Mill Sdn. Bhd., All Rights Reserved
Lot 861, Jalan Subang 8, Sg. Penaga Industrial Park,47500 Subang Jaya,Selangor
Tel : 603-8024 2200    Fax: 603-8024 6262
Email :